V&M Inc.

300 E. 40th St. N.
Sioux Falls, SD 57104-0701
1-800-648-6507 - US and Canada
(605) 332-4335
FAX (605) 332-3156

Email: vandm@vandminc.com

Return to homepage

ADD-A-VALVE / SUPER ADD-A-VALVE / MV SERIES/ SV DIRECTIONAL
ONE WAY ADD-A-VALVE / SV SERIES / SHUT-OFF BLOCK

SV DIRECTIONAL VALVE

FEATURES:

Adds 1 to 8 remote valves

4-6 GPM per outlet 3000 PSI (15-22 lpm 207 bar)

Works on most tractors

Finger tip control

Easy to install

12 volt standard (24 volt available)

New from V&M Hydraulics - the SV Directional valve. This valve can be plumbed through the pump for directional control of cylinders, motors, etc.
This valve flows from 4 to 6 GPM, 3000 PSI. It is available for open or closed center systems in various configurations and coil voltages (12 V standard). Styles are also available to use with a 12-volt pump commonly used on pickup sprayers.

A control box with rocker switches controls the SV Directional. This will allow the operator to move the switch forward to extend the cylinder or move the switch backward to retract. These switches are available in momentary and held styles.

The switches are water and dust proof. They are rated at 100,000 cycles-minimum-for long life in or out of the cab.
Many older tractors have one single acting (power up - gravity down) remote valve. We can turn these 1-way systems into a 2-way system while increasing your remote outlets - up to 8 sets.
Those of you with who currently use our SV Series Multiplier Valves can add the SV Directional Valve to "upgrade" to a directional system.
Some common uses for the SV Directional are sprayer booms, hay equipment, scrapers, markers, mowers, etc.


		300 E. 40th St. N. Sioux Falls, SD 57104-0701 1-800-648-6507 - US and Canada (605) 332-4335 FAX (605) 332-3156 Email: vandm@vandminc.com
	Return to homepage
ADD-A-VALVE / SUPER ADD-A-VALVE / MV SERIES/ SV DIRECTIONAL ONE WAY ADD-A-VALVE / SV SERIES / SHUT-OFF BLOCK


	SV DIRECTIONAL VALVE
	SV DIRECTIONAL VALVE		FEATURES: Adds 1 to 8 remote valves 4-6 GPM per outlet 3000 PSI (15-22 lpm 207 bar) Works on most tractors Finger tip control Easy to install 12 volt standard (24 volt available)


	New from V&M Hydraulics - the SV Directional valve. This valve can be plumbed through the pump for directional control of cylinders, motors, etc. This valve flows from 4 to 6 GPM, 3000 PSI. It is available for open or closed center systems in various configurations and coil voltages (12 V standard). Styles are also available to use with a 12-volt pump commonly used on pickup sprayers.
			A control box with rocker switches controls the SV Directional. This will allow the operator to move the switch forward to extend the cylinder or move the switch backward to retract. These switches are available in momentary and held styles.
	The switches are water and dust proof. They are rated at 100,000 cycles-minimum-for long life in or out of the cab. Many older tractors have one single acting (power up - gravity down) remote valve. We can turn these 1-way systems into a 2-way system while increasing your remote outlets - up to 8 sets. Those of you with who currently use our SV Series Multiplier Valves can add the SV Directional Valve to "upgrade" to a directional system. Some common uses for the SV Directional are sprayer booms, hay equipment, scrapers, markers, mowers, etc.