V&M Inc.

300 E. 40th St. N.
Sioux Falls, SD 57104-0701
1-800-648-6507 - US and Canada
(605) 332-4335
FAX (605) 332-3156

Email: vandm@vandminc.com

Return to homepage

ADD-A-VALVE / SUPER ADD-A-VALVE / MV SERIES/ SV DIRECTIONAL
ONE WAY ADD-A-VALVE / SV SERIES / SHUT-OFF BLOCK

SV SERIES
For spayers, hay equipment markers and folding applications
FEATURES:

Adds one to seven remote outlets
6-8 GPM per outlet 3000 PSI (25 lpm 207 bar)
Dual cartridge for positive lock
Works on any tractor, open or closed center
Easy to mount
One handed operation
Aluminum body construction
Optional lock on switch available for float or detent operation
Commercial grade sealed switches
12V or 34V coils (12V standard)

V&M SV Series hydraulic multiplier is a 6-8 GPM valve. Continuous flow of more than 8 GPM will cause excessive heat built up.

SV Series hydraulic multiplier valve bodies have dual poppet style cartridges to virtually eliminate any leak down of your implements (i.e., planter and sprayer booms dropping in the field).

The standard SV unit will not operate one way cylinders. When ordering, please specify number of single acting functions.

The SV series hydraulic multiplier valve comes standard with a bolt on style mounting bracket for easy installation on any implement. The V&M control handle also comes with a mounting bracket that slips over your existing remote lever in the cab giving you one handed operation. With the handle mounted on your remote lever you just select the function by pressing one or more buttons and then direct the flow by moving the handle. Typically, forward is down, back is up.
V&M SV Series hydraulic multiplier control handles come with red momentary switches that must be pressed and held during hydraulic operation.

Optional white lock on switches must be pressed to activate hydraulic operation. This switch stays on until pressed again which turns the function off. This button works well for float and detent operations. V&M control handles are prewired to handle up to six commercial grade switches.

V&M SV Series multiplier valve turns one of your remote outlets into a 2, 3, 4, 5, 6, 7 or 8 outlet system. If you only need two or three outlets now, you can expand your system later.

Typical uses for the SV Series hydraulic multiplier are sprayers, disc wings, markers, hay equipment, mowers, etc. It works well on most low volume applications.

WARRANTY: Two years from date of purchase on manufacturing defects.


		300 E. 40th St. N. Sioux Falls, SD 57104-0701 1-800-648-6507 - US and Canada (605) 332-4335 FAX (605) 332-3156 Email: vandm@vandminc.com
	Return to homepage
ADD-A-VALVE / SUPER ADD-A-VALVE / MV SERIES/ SV DIRECTIONAL ONE WAY ADD-A-VALVE / SV SERIES / SHUT-OFF BLOCK


	SV SERIES For spayers, hay equipment markers and folding applications		FEATURES: Adds one to seven remote outlets 6-8 GPM per outlet 3000 PSI (25 lpm 207 bar) Dual cartridge for positive lock Works on any tractor, open or closed center Easy to mount One handed operation Aluminum body construction Optional lock on switch available for float or detent operation Commercial grade sealed switches 12V or 34V coils (12V standard)

	V&M SV Series hydraulic multiplier is a 6-8 GPM valve. Continuous flow of more than 8 GPM will cause excessive heat built up. SV Series hydraulic multiplier valve bodies have dual poppet style cartridges to virtually eliminate any leak down of your implements (i.e., planter and sprayer booms dropping in the field).
	The standard SV unit will not operate one way cylinders. When ordering, please specify number of single acting functions. The SV series hydraulic multiplier valve comes standard with a bolt on style mounting bracket for easy installation on any implement. The V&M control handle also comes with a mounting bracket that slips over your existing remote lever in the cab giving you one handed operation. With the handle mounted on your remote lever you just select the function by pressing one or more buttons and then direct the flow by moving the handle. Typically, forward is down, back is up. V&M SV Series hydraulic multiplier control handles come with red momentary switches that must be pressed and held during hydraulic operation. Optional white lock on switches must be pressed to activate hydraulic operation. This switch stays on until pressed again which turns the function off. This button works well for float and detent operations. V&M control handles are prewired to handle up to six commercial grade switches. V&M SV Series multiplier valve turns one of your remote outlets into a 2, 3, 4, 5, 6, 7 or 8 outlet system. If you only need two or three outlets now, you can expand your system later. Typical uses for the SV Series hydraulic multiplier are sprayers, disc wings, markers, hay equipment, mowers, etc. It works well on most low volume applications. WARRANTY: Two years from date of purchase on manufacturing defects.