V&M Inc.

300 E. 40th St. N.
Sioux Falls, SD 57104-0701
1-800-648-6507 - US and Canada
(605) 332-4335
FAX (605) 332-3156

Email: vandm@vandminc.com

Return to homepage

ADD-A-VALVE / SUPER ADD-A-VALVE / MV SERIES/ SV DIRECTIONAL
ONE WAY ADD-A-VALVE / SV SERIES / SHUT-OFF BLOCK

MV SERIES
For higher flow applications where speed is a factor - like loaders and other large cylinders
FEATURES:

Adds one to five remote outlets

18-20 GPM per outlet 3000 PSI (68-75 lpm 207 bar)
Works on any tractor, open or closed center

Mounts on tractor or implement

Easy one handed operation

Cast iron construction

Optional lock on switches available for continuous operation

Commercial grade sealed switch
12V or 24V coils (12V standard

V&M MV Series hydraulic multiplier is an 18-20 GPM valve, 3000 PSI. It closely matches the flow of most newer tractors.

V&M MV Series hydraulic multiplier is easy to mount. The valve block comes with bolt on mounting brackets for easy installation on your tractor or implement. The control handle has it's own bracket that slips over your existing remote lever in the cab giving you one handed operation. With the handle mounted on your remote lever you just select the function by pressing one or more buttons and then direct the flow by moving the handle. Typically, forward is down, back is up.

V&M hydraulic multiplier control handles come with red momentary switches that must be pressed and held during hydraulic operation.

Optional white lock on switches must be pressed to activate hydraulic operation. This switch stays on until pressed again which turns the function off. This switch works well for float and detent operations. V&M control handles are prewired to handle up to six commercial grade switches.

V&M multiplier valve block turns one of your hydraulic remote outlets into a 2, 3, 4, 5 or 6 outlet system. If you only need two or three outlets now, you can expand your system later.

The MV Series hydraulic multiplier can be used for almost any hydraulic use.

WARRANTY: Two years from date of purchase on manufacturing defects.


		300 E. 40th St. N. Sioux Falls, SD 57104-0701 1-800-648-6507 - US and Canada (605) 332-4335 FAX (605) 332-3156 Email: vandm@vandminc.com
	Return to homepage
ADD-A-VALVE / SUPER ADD-A-VALVE / MV SERIES/ SV DIRECTIONAL ONE WAY ADD-A-VALVE / SV SERIES / SHUT-OFF BLOCK


MV SERIES For higher flow applications where speed is a factor - like loaders and other large cylinders				FEATURES: Adds one to five remote outlets 18-20 GPM per outlet 3000 PSI (68-75 lpm 207 bar) Works on any tractor, open or closed center Mounts on tractor or implement Easy one handed operation Cast iron construction Optional lock on switches available for continuous operation Commercial grade sealed switch 12V or 24V coils (12V standard



			V&M MV Series hydraulic multiplier is an 18-20 GPM valve, 3000 PSI. It closely matches the flow of most newer tractors.

		V&M MV Series hydraulic multiplier is easy to mount. The valve block comes with bolt on mounting brackets for easy installation on your tractor or implement. The control handle has it's own bracket that slips over your existing remote lever in the cab giving you one handed operation. With the handle mounted on your remote lever you just select the function by pressing one or more buttons and then direct the flow by moving the handle. Typically, forward is down, back is up.
	V&M hydraulic multiplier control handles come with red momentary switches that must be pressed and held during hydraulic operation. Optional white lock on switches must be pressed to activate hydraulic operation. This switch stays on until pressed again which turns the function off. This switch works well for float and detent operations. V&M control handles are prewired to handle up to six commercial grade switches. V&M multiplier valve block turns one of your hydraulic remote outlets into a 2, 3, 4, 5 or 6 outlet system. If you only need two or three outlets now, you can expand your system later. The MV Series hydraulic multiplier can be used for almost any hydraulic use.
WARRANTY: Two years from date of purchase on manufacturing defects.